Selecting-a-Appropriate-LED-Driver-for-Your-LED-Strip-Lights

These days we are answering yet another one particular of your FAQs, this time relating to the subject matter of LED Motorists.

As LED Strip Lights have voltage and present specifications which are different to the mains electricity supply (240V AC), they want a separate unit known as an LED Driver in order to work.

What is an LED Driver?

An LED Driver, occasionally referred to as a transformer or power source, is a self-contained electrical power provide that matches its output to the voltage and current needs of the device it serves. Doing work on a comparable basis to the 12V transformers in MR16 highlight programs, the LED Driver takes the mains electrical energy offer and alterations it to 12V DC.

Which LED Driver do I need to have?

Motorists appear in numerous styles and sizes, and not all will be appropriate for your purposes. When deciding on a driver you need to consider the following:

-The power outlet you are employing

-The dimensions of your LED Strip Lights.

LED Drivers come in two principal kinds "plug and play" and mains completely ready.

As the name implies, "plug and engage in" motorists are created for fast and effortless set up, and require minimum skills to use. The driver connects to the mains offer by means of a regular United kingdom three-pin plug and to the strip lights via corresponding male and female connectors.

Mains all set drivers are developed for much more advanced installations and can be hardwired straight into your family mains, normally by means of a domestic home swap for a completely built-in lighting encounter. An IP67 ratingalso can make them suitable for use in moist and damp circumstances.

As properly as the sort, you will also have to decide on a suitably sized driver. The dimensions of the driver is calculated in watts and needs to be matched to the electrical power intake, or "load," of your LED Strip Lights.

To determine [httpswww.ukled.co.ukled-drivers.html httpswww.ukled.co.ukled-drivers.html] of your strip lights, multiply the wattage per metre by the total amount of metres you intend to operate off a single driver. This can be expressed as follows:

wattage for every metre x amount of metres = whole electrical power use (load)

For occasion, if you are using 10 metres of LED Strip Light-weight that consumes 7.2 watts per metre, the entire load will be ten x seven.2 = 72 watts. In this specific example an a hundred watt driver will be sufficient.

Bear in mind, it is possible to run a lot more than one particular strip mild off a single driver. Usually consult a professional electrician ahead of trying any mains electrical work.